Skoda Yeti Owner's Manual page 86

Using the system
Fig. 90 The air conditioning system: Control elements
Setting temperature
›
Turn the control dial » Fig. 90
A
›
Turn the control dial to the left to decrease the temperature.
A
Controlling blower
›
Turn the blower switch » Fig. 90
B
the blower on.
›
Turn the blower switch into position 0 to switch the blower off.
B
›
Press the button to close the fresh air supply
4

Regulating the air distribution
›
The direction of the inlet air flow is controlled with air distribution regulator
» Fig. 90 » page 81, Air outlet vents.
C
Switching the cooling system on and off
›
Press the button » Fig. 90. The indicator light lights up in the button.
AC 1
›
When you again press the button
off. The indicator light in the button goes out.
Rear window heater
›
Press the button » Fig. 90. Further information
2

and rear window heater.
84
Using the system
to the right to increase the temperature.
into one of the positions, 1 to 4, to switch
» Fig. 90.
, the air conditioning system is switched
AC
» page 47, Windscreen
Auxiliary heating (parking heating)
›
Press the button » Fig. 90 to directly switch on/off the auxiliary heating
3

(auxiliary heating and ventilation). Further information
heating (auxiliary heating and ventilation).
Note
The whole heat output will be needed to defrost the windscreen and side win-
■
dows. No warm air will be fed to the footwell. This can lead to restriction of the
heating comfort.
The indicator light » Fig. 90 lights after activation, even if not all of the con-
AC
■
ditions for the function of the cooling system have been met
tory information. By lighting up of the indicator light in the button, the operation-
al readiness of the cooling system is signalled.
» page 88, Auxiliary
» page 83, Introduc-
Ð