Skoda Yeti Owner's Manual page 120

Note
If a suitable adapter is available for your mobile phone, only use your mobile
■
phone in the adapter inserted in the telephone mount so that the radiation in the
vehicle drops to a minimum.
Placing the mobile phone in the adapter inserted in the telephone mount en-
■
sures optimum sending and receiving power.
Inserting the mobile phone and adapter
Only one telephone mount is factory-fitted. An adapter for the mobile phone can
be purchased from ŠKODA Original Accessories.
Inserting the adapter and mobile phone
›
First of all push the adapter in the direction of the arrow
A
stop into the mount. Then press the adapter slightly downwards, until it locks
securely into position.
›
Insert the mobile phone into the adapter
from the manufacturer of the adapter).
Removing the adapter and mobile phone
›
Simultaneously press the locks on the mount
with the mobile phone.
118
Using the system
Fig. 111
Universal telephone preinstalla-
tion
» Fig. 111 up to the
(as specified in the instructions
A
» Fig. 111 and remove the adapter
CAUTION
Taking the mobile phone out of the adapter during the call can lead to interrup-
tion of the connection. When removing the mobile phone, the connection to the
factory-fitted antenna is interrupted, which reduces the quality of the transmit-
ting and receiving signal. The charging of the mobile phone battery is also inter-
rupted.
Ð
Managing telephone calls with the help of the adapter
Fig. 112 Principle sketch: Adapter with one button/adapter with two but-
tons
Function overview of the (PTT - "push to talk") button on the adapter

›
Switch on/off voice control;
›
Accept/end a call.
On some adapters include the button
. After pressing this button for 2 seconds, the number 112 (Emergency call) is

dialled.
Note
On vehicles fitted with the Columbus navigation system , the buttons
do not work.
» Fig.
» Fig. 112 in addition to the button
SOS A
and

Ð
112:
SOS
Ð