Preset Tuning - Teac CR-H700 Owner's Manual

FM Mode
You can select between Stereo and Mono by pressing
the FM MODE button when a stereo FM program is
tuned in.
Stereo:
FM stereo broadcasts are received in stereo and "ST" is
displayed.
When a broadcast signal cannot be tuned in, the
sound is muted.
FM/ST
108.00MHz
Mono:
Select this mode when the signal is weak. Reception
will be changed to monaural, reducing unwanted
noise.
When you try to listen to another broadcast but its
signal cannot be tuned in, the FM mode changes to
Stereo and the sound is muted.
10:00

Preset Tuning (1)

Presetting Automatically (FM/AM)
You can store up to 30 FM, 30 AM.
1
Select FM or AM by pressing the TUNER button
repeatedly.
2 Hold down the PROGRAM button for more than
3 seconds.
Up to 30 of the best received stations in your area will
be stored automatically.
29