Configuring Your Broadband Connection; Confirming Your Coax Connection; Connecting To The Internet - Verizon FiOS 9100EM User Manual

Verizon FiOS Router (Model 9100EM)

7. CONFIGURING YOUR BROADBAND CONNECTION

To browse the Internet using your Router, first confirm your coax link and establish an Internet connection with
Verizon. The procedures for configuring your Router for Internet connection are explained in this section.

7.1 Confirming Your Coax Connection

IMPORTANT: You must have active broadband service before the Router can synchronize with Verizon's
equipment and establish an Internet connection.
To determine if the Router has established coax link, at the Router's front panel, check to see if the Router's COAX
WAN LED is solid green or flashing amber— this indicates that a coax link is established.
After confirming your coax link, proceed to section 7.2 to configure your Router's Internet connection settings.

7.2 Connecting to the Internet

After you have logged on to the Router, the following home page will appear. Use this page to determine the
Router's Internet connection status. If you do not have an Internet connection, the Internet Address field will
display "Not Available."
To begin your connection setup, at top navigation menu, click My Network.
030-300554 Rev. A 19
User Guide
June 2008