Ringer Tone; Ringer Tone - Panasonic KX-TG5240 Operating Instructions Manual

Base unit ringer volume
Make sure the base unit is not being used.
To set the ringer volume to high (preset), medium, or low, press [d] or [B].
• To increase volume, press [B]. To decrease volume, press [d].
• To stop ringing, press [STOP].
To turn the ringer off, press and hold [d] until 2 beeps sound.
RINGER
• " " is displayed.
OFF
To turn the ringer on, press [d] or [B].
• The base unit will ring at the low level.
• You can adjust the ringer volume while an outside call is ringing.
Press [d] or [B] while the base unit is ringing.
To turn the ringer off, press and hold [d] until 2 beeps sound. "

Ringer Tone

You can set the handset and base unit ringers to use one of 7 ringer patterns for
outside calls. "Tone 1" to "Tone 3" are bell ringer patterns. "Melody 1" to "Melody 4"
are preset melody patterns. The factory preset is "Tone 1".
• You cannot change the ringer tone for intercom calls.
• If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your
telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 1 to 3).
If you select a melody pattern, you will not be able to distinguish lines by their ringers.
• If you select one of the melody ringer patterns, the ringer will continue to sound for
several seconds if:
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same line.
Handset ringer tone
1
Press [MENU].
2
Press the soft key (
setting".
3
Scroll to "Ringer tone" by pressing [d] or
[B], then press the soft key (
4
Select the desired ringer tone by pressing
[d] or [B].
• The handset will ring and the ringer tone will
change. If the ringer volume has been turned off,
the handset will not ring (p. 20).
• You can also select the ringer tone by pressing
[1] to [7].
5
Press the soft key (
For assistance, please call: 1-800-211-PANA(7262)
Programmable Settings
Base Unit
Handset
) at "Ringer
SELECT
).
SELECT
), then press [OFF].
SAVE
RINGER " is displayed.
OFF
Ringer setting

Ringer tone

Ringer tone
1:Tone 1
21