Number Of Rings - Panasonic KX-TG5240 Operating Instructions Manual

5.8 ghz expandable cordless phone system
Hide thumbs Also See for KX-TG5240:
Table of Contents

Advertisement

4
Scroll to "Recording time" by pressing
[d] or [B], then press the soft key (
5
Select the recording time by pressing [d] or [B].
• You can also select the recording time by
pressing [1], [2], [3], or [0] (Greeting only).
6
Press the soft key (
If you select "Greeting only", the unit will answer a call with the greeting
message, and then hang up. The unit will not record any incoming messages.
The base unit will display "

Number of Rings

You can select the number of times the unit rings before the Answering System
answers a call, from "2" to "7" or "Toll saver"*. The factory preset is "4".
1
Press [MENU].
2
Scroll to "Initial setting" by pressing [d] or [B], then press the
soft key (
SELECT
3
Press the soft key (
4
Press the soft key (
rings".
5
Select the number of rings by pressing [d] or [B].
• You can also select the number of rings by
pressing [0] (Toll saver*), or [2] to [7].
• The unit will announce a caller's name after the
2nd ring (Talking Caller ID, p. 32, 33). To listen
to the name announcements, do not select
6
Press the soft key (
*Toll saver
When you call the unit from a remote location, the number of rings will tell you if
there are any new messages. If the unit answers on the 2nd ring, there is at least
one new message. If the unit answers on the 4th ring, there are no new
messages. To save the toll charges for the call, hang up immediately when you
hear the 3rd ring. The 3rd ring indicates that there are no new messages.
• The unit will announce a caller's name after the 2nd ring (Talking Caller ID, p. 32,
33). If "Toll saver" is selected, and there is a new message, the unit will not
announce the caller's name.
For assistance, please call: 1-800-211-PANA(7262)
Preparing the Answering System
), then press [OFF].
SAVE
" instead of the number of messages.
Handset
).
) at "Set answering".
SELECT
) at "Number of
SELECT
), then press [OFF].
SAVE
Recording time
).
SELECT
Recording time
:3min
Number of rings
Number of rings
:4
"
"
2
.
25

Advertisement

Table of Contents
loading

Table of Contents