PQQX14045ZA.book 16 ページ 2004年2月19日 木曜日 午後3時47分
Programmable Settings
Ringer Tone
You can set the handset ringer to use one of 7 ringer patterns for outside calls.
"Tone 1" to "Tone 3" are bell ringer patterns. "Melody 1" to "Melody 4" are melody
patterns. The factory preset is "Tone 1".
• If you subscribe to a Distinctive Ring Service from your telephone company with
2 or 3 consecutive rings, select a bell ringer pattern (Tone 1 to 3). If you select a
melody pattern, you will not be able to distinguish lines by their ringers.
• If you select one of the melody ringer patterns, the ringer will continue to sound for
several seconds if:
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same
line.
Press [MENU].
1
Scroll to "Ringer setting" by pressing [d]
2
or [B], then press Select.
Scroll to "Ringer tone" by pressing [d] or
3
[B], then press Select.
Select the desired ringer tone by pressing [d]
4
or [B].
• The handset will ring and the ringer tone will
change. If the ringer volume has been turned off,
the handset will not ring (p. 15).
• You can also select the ringer tone by pressing [1]
to [7].
Press Save, then press [OFF].
5
16
Handset
Ringer setting
Back
Select
K
L
dB
Ringer tone
Back
Select
K
L
dB
Ringer tone
1:Tone 1
Back
Save
K
L
dB