Answering Calls - Panasonic KX-TG5240 Operating Instructions Manual

Answering Calls

When a call is received, the unit rings, "Incoming call" is displayed, and the
Ringer/Message Alert indicator on the handset and the IN USE indicator on the base
unit flash rapidly.
Handset
1
Press [C] or [s].
• You can also answer a call by pressing any
button except [d], [B] or [OFF].
2
To hang up, press [OFF] or place the
handset on the base unit.
Auto Talk
If the Auto Talk feature is turned on (p. 19), you can
answer a call by simply lifting the handset off the
base unit (or the charger, for accessory handset
users, p. 3).
Temporary ringer off
While the handset is ringing for an outside call, you can turn the ringer off
temporarily by pressing [OFF]. The handset will ring again as normal the next time
a call is received.
Base Unit
1
Press [SP-PHONE].
2
Talk into the MIC.
3
To hang up, press [SP-PHONE].
• To transfer the call to another extension, see page 50.
• To transfer the call to a mailbox to allow the caller to leave a message,
see page 69.
• If the ringer volume is turned off, the unit will not ring (p. 20, 21).
For assistance, please call: 1-800-211-PANA(7262)
Ringer/
Message
Alert
Indicator
[ ]
[OFF]
[ ]
IN USE
Indicator
[SP-PHONE]
and Indicator
MIC
31