Ringer Tone; Incoming Call Tone - Panasonic KX-TG2383B Operating Instructions Manual

Special Features

Ringer Tone

You can select the handset ringer tone out of 6 patterns for external calls.
When an external call is being received, the handset will ring in the
selected tone. Your phone comes from the factory set to "1".
Make sure the unit is not being used and the handset is lifted off the base unit.
Press
1
(MUTE/FUNCTION).
Scroll to "Ringer setting" by pressing
2
or
Ö Ñ
3 Scroll to "Ringer tone" by pressing
, and press
Ñ
•The current setting will be displayed.
4 Select the desired ringer tone by pressing
or
Ö Ñ
•Each time you press Ö or Ñ, the tone will
change and ring. If the ringer volume has been
set to OFF, the handset will not ring (p. 19).
•You can also select the ringer tone by pressing dialing buttons (1) to (6).
Press
5
á
•A beep sounds.
•To exit the programming mode, press (OFF).

Incoming Call Tone

During an intercom call (p. 42), or while listening to messages on the
handset (p. 52), you can be informed by two tones if a call arrives. If you
set to ON, this incoming call tone will be heard for as long as the line rings.
To delete the incoming call tone, set to OFF. To set the incoming call tone
to sound twice, set to "2". Your phone comes from the factory set to "2".
Make sure the unit is not being used and the handset is lifted off the base unit.
1 Press
(MUTE/FUNCTION)
"Ringer setting" by pressing
and press
2 Scroll to "Incoming call" by pressing
or , and press
Ñ
•The current setting will be displayed.
3 Select "On", "Off" or "2" by pressing
.
Ñ
Press
4
á
•A beep sounds.
•To exit the programming mode, press (OFF).
48
, and press .
á
.
á
.
(Save key).
.
á
.
á
(Save key).
Ö
and scroll to
or
Ö Ñ
Ö
or
Ö
Message play
H
Ringer setting
Date and time
or
Ringer volume
H
Ringer tone
Incoming call
Ringer tone
GF
Message play
,
H
Ringer setting
Date and time
Ringer tone
H
Incoming call
--------------
Incoming call
tone :2
GF
:1
H
=Save
H
=Save