Tire Inflation Pressures - Jeep Wrangler 2012 Owner's Manual

Includes wrangler unlimited
Hide thumbs Also See for Wrangler 2012:
Table of Contents

Advertisement

446 STARTING AND OPERATING
Economy
Improper inflation pressures can cause uneven wear
patterns to develop across the tire tread. These abnormal
wear patterns will reduce tread life resulting in a need for
earlier tire replacement. Under-inflation also increases
tire
rolling
resistance
consumption.
Ride Comfort And Vehicle Stability
Proper tire inflation contributes to a comfortable ride.
Over-inflation produces a jarring and uncomfortable
ride.

Tire Inflation Pressures

Tire pressure should be checked and adjusted as well as
inspected for signs of tire wear or visible damage, at least
once a month. Use a good quality pocket-type gauge to
check tire pressure. Do not make a visual judgement
when determining proper inflation. Radial tires may look
properly inflated even when they are under-inflated.
resulting
in
higher
After inspecting or adjusting the tire pressure, al-
ways reinstall the valve stem cap. This will prevent
moisture and dirt from entering the valve stem,
fuel
which could damage the Tire Pressure Monitoring
Sensor.
Inflation pressures specified on the placard are always
"cold tire inflation pressure." Cold tire inflation pressure
is defined as the tire pressure after the vehicle has not
been driven for at least three hours, or driven less than
1 mile (1.6 km) after a three-hour period. The cold tire
inflation pressure must not exceed the maximum infla-
tion pressure molded into the tire side wall.
Check tire pressures more often if subject to a wide range
of outdoor temperatures, as tire pressures vary with
temperature changes.
CAUTION!

Advertisement

Table of Contents
loading

This manual is also suitable for:

2012 wrangler unlimited

Table of Contents