Jeep Wrangler 2012 Owner's Manual page 136

134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Changing the Volume
1. Start a dialogue by pressing the Voice Command
button.
2. Say a command (e.g., "Help").
3. Use the ON/OFF VOLUME rotary knob to adjust the
volume to a comfortable level while the Voice Command
system is speaking. Please note the volume setting for
Voice Command is different than the audio system.
Main Menu
Start a dialogue by pressing the Voice Command
button. You may say "Main Menu" to switch to the main
menu.
In this mode, you can say the following commands:
• "Radio" (to switch to the radio mode)
• "Disc" (to switch to the disc mode)
• "Memo" (to switch to the memo recorder)
• "Setup" (to switch to system setup)
Radio AM
To switch to the AM band, say "AM" or "Radio AM". In
this mode, you may say the following commands:
• "Frequency #" (to change the frequency)
• "Next Station" (to select the next station)
• "Previous Station" (to select the previous station)
• "Radio Menu" (to switch to the radio menu)
• "Main Menu" (to switch to the main menu)