Jeep Wrangler 2012 Owner's Manual page 177

• Two Sunrider secure straps (if equipped)
• Two rear swing gate brackets
2. Remove the hard top. Refer to "Freedom Top Three-
Piece Modular Hard Top — Front/Rear Panel Removal"
in this section.
3. Remove the soft top bow assembly pivot bracket
screws (two per side) using a #T30 Torx head driver.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175
4. Disconnect the knuckles from the left and right metal
pivot brackets. Remove the soft top from the vehicle and
store in a clean, dry location.
3