Jeep Wrangler 2012 Owner's Manual page 180

178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
b. Lay the soft top into the rear of the vehicle with the
bows pointing forward and the curved portion of the
bows facing upward.
c. Reattach the knuckles onto the metal pivot brackets.
NOTE: To aid in reattaching the knuckles, you may
carefully tap on the knuckles using a rubber mallet.
d. Screw the pivot screws back into place using a #T30
Torx head driver. Secure them until they are snug,
being careful not to cross-thread the screws or over-
tighten.