Led Indicator; Link Pass Through Function - D-Link 1000BASE-TX to 1000BASE-SX/LX Media Converter User Manual

NOTE: To control the function in a working station, need to collocate together with optional Chassis
System and Management Module.

LED Indicator

The LED indicators give you instant feedback on status of the
converter:
LEDs
Power
(PWR)
Link and
Activity Lights Blinking
(LINK/ACT)

Link Pass Through Function

LLCF (Link Loss Carry Forward)
When a device connected to the converter and the TP line loss
the link, the converter's fiber will disconnect the link of
transmit, so that the other ends will know that there is a
linkage error on this end. And when the Fiber line loss the
link, the converter's TP will disconnected, and the other end
will know that there is linkage problem exist.
There is a default LLCF setting on this converter.
State
Lights on
Lights off
Lights on
Lights off
Indication
Power on
Power off
Linking
Data transmitting and receiving
Not Linking
7