Led Indicator; Link Pass Through Function - D-Link 1000BASE-TX User Manual

NOTE: To control the function in a working station, need to collocate together with optional Chassis
System and Management Module.

LED Indicator

The LED indicators give you instant feedback on status of the
converter:
LEDs State
Lights on
Power
(PWR)
Lights off
Lights on
Link and
Activity
Lights Blinking
(LINK/ACT)
Lights off

Link Pass Through Function

LLCF (Link Loss Carry Forward)
When a device connected to the converter and the TP line loss
the link, the converter's fiber will disconnect the link of
transmit, so that the other ends will know that there is a
linkage error on this end. And when the Fiber line loss the
link, the converter's TP will disconnected, and the other end
will know that there is linkage problem exist.
There is a default LLCF setting on this converter.
Indication
Power on
Power off
Linking
Data transmitting and receiving
Not Linking
7