Calculated Industries 44080 Construction Master Pro Desktop v3.0 User Manual page 91

(Cont'd)
PREFERENCE
3) Volume Display Format – *Standard (if units entered are the
4) Stairwell—Headroom
Height
5) Rake-Wall Descending
or Ascending
6) Jack Rafters Descending – *Descending (Jack rafters are
or Ascending
7) Irregular Jack Rafters
O-C or Mate
90 — C
ONSTRUCTION
OPTIONS
same—e.g., ft x ft x ft—the answer will
remain in this format (cu. ft), but if units
entered are different—e.g., feet x feet x
inches—vol. answer will always be dis-
played in cubic yards)
– Cubic Yards (vol. answers always dis-
played in cu. yards, regardless of unit
entry—e.g., feet x feet x feet = cu. yds)
– Cubic Feet (vol. answers always dis-
played in cu. feet, regardless of unit
entry—e.g., inches x inches x inches =
cu. ft)
– Cubic Meters (vol. answers always
displayed in cu. meters, regardless of
unit entry—e.g., feet x feet x feet =
cu. meters)
– *6 Feet 8 Inch (default)
– Use + or – key to increase or
decrease above value by increments
of 1 inch
– *Descending (Rake-Wall studs are
displayed from largest to smallest size)
– Ascending (Rake-Wall studs are
displayed from smallest to largest size)
displayed from largest to smallest size)
– Ascending (Jack rafters are displayed
from smallest to largest size)
– *OC-OC (on-center spacing maintained
on both regular and irregular sides)
– JAC-JAC (regular/irregular Jack rafters
"mate" at the hip/valley, i.e., on-center
spacing not maintained on both sides)
M ® P / T
ASTER RO
/ D
RIG ESKTOP
(Cont'd)