RAM Truck 2011 Owner's Manual page 47

Chassis cab
Hide thumbs Also See for Ram Truck 2011:
Table of Contents

Advertisement

Regular Cab Front Center Three Point Belt
1. The front center seat belt on the Regular Cab may be
disconnected to open up utilization of the storage areas
behind the front seats. The black latch plate can be
detached from the black keyed seat belt buckle located on
the inboard side of the passenger seat. Insert the seat belt
tongue into the center red slot on the black buckle. The
black buckle latch plate can be removed when the seat
belt tongue is pressed into the buckle. Allow the retractor
to take up the extra webbing, and the buckles will hang
vertically from the cab back exit bezel, thus freeing up all
the area behind the front seats.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45
Detaching Buckle With Seat Belt Tongue
2. To reattach the seat belt to the front center seat, pull
the black buckle latch plate forward from the cab back
panel and insert it into the black keyed buckle until there
is an audible "click". For proper seatbelt usage, refer
"Lap/Shoulder Belt Operating Instructions".
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Truck chassis cab 2011

Table of Contents