Memory Position Recall - RAM Truck 2011 Owner's Manual

7. Within five seconds, press and release MEMORY
button 1 or 2 on the driver's seat. The next steps must be
performed within 10 seconds if you desire to also use a
RKE transmitter to recall memory positions.
8. Turn the ignition OFF and remove the key.
9. Press and release the LOCK button on one of the RKE
transmitters.
10. Repeat the above steps to set the next memory
position using the other numbered memory button or to
link another RKE transmitter to memory.

Memory Position Recall

NOTE:
• The vehicle must be in PARK to recall the memory
positions.
• Not all motors may be moved at one time. Refer to the
"Seats/Eight-Way Power Seat" in this section for fur-
ther information.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141
To recall the memory settings for driver one, press
MEMORY button number 1 on the driver's seat or the
UNLOCK button on the RKE transmitter linked to
memory position 1.
To recall the memory setting for driver two, press
MEMORY button number 2 on the driver's seat or the
UNLOCK button on the RKE transmitter linked to
memory position 2.
A recall can be cancelled by pressing any of the
MEMORY buttons on the driver's seat during a recall (S,
1, or 2), or pressing any one of the power seat buttons,
pressing the adjustable pedals button, or pressing either
the LOCK or UNLOCK button on the RKE transmitter
when not in the ignition switch. When a recall is can-
celled, the driver's seat and the pedals stop moving. A
delay of one second will occur before another recall can
be selected.
3