Table of Contents
Advertisement
D3-3
<D3. Configuration Method>
FD0302.ai
Figure D3-2 Mode Change Confirmation Dialog
Clicking the [OK] button navigates to the login window shown in Figure D2-3. Log in again and
setup will start up in Edit mode.
Clicking the [Cancel] button terminates the mode switching.
Setup starts up in Display mode even if the mode was Edit at the last logoff; so, it is necessary to
change modes every time the YFGW510 setting modification is required.
If configuration have been completed, restart the YFGW510 click the [Restart] button.
For other button functions, see D3.4 Maintenance.
IMPORTANT
Changing mode requires that YFGW510 completes bootup sequence.
If changing mode is failed, restart the YFGW510. For details of a booting up time of YFGW510,
see D2.2.2 Field Wireless Access Point Setup Tool.
IM 01W02E01-01EN
Advertisement
Table of Contents
