Table of Contents
Advertisement
Mounting on vertical pipe (Communications interface: Wireless LAN
n
client)
Figure C4-2 Mounting on vertical pipe (Communications interface: Wireless LAN client)
When used for the wireless LAN single model, YFGW510 is equipped only with the connector for
wireless LAN antenna on the left side of the housing.
Assemble the bracket and attach YFGW510 to the bracket. Fasten it to the pipe using the U-
bolts.
For wiring procedure using cable connectors, see the section on wiring.
The wireless LAN antenna(s) must be placed away from the ISA100.11a antenna, using an ex-
tension cable. For details, see the section on antenna installation
Mounting on horizontal pipe (Communications interface: 100BASE-
n
TX/100BASE-FX)
Figure C4-3 Mounting on horizontal pipe (Communications interface: 100BASE-TX/100BASE-FX)
Assemble the bracket and attach YFGW510 to the bracket. Fasten it to the pipe using the U-
bolts.
For wiring procedure using cable connectors, see the section on wiring.
<C4. Mounting>
FC0402.ai
FC0403.ai
IM 01W02E01-01EN
C4-2
Advertisement
Table of Contents
