Table of Contents
Advertisement
Nut
Nut
Antenna Extension Cable
Bracket
Figure C5-11 Fastening wireless LAN antenna
l Wireless LAN antenna fastening procedure
1.
Fix the bracket by U-bolt and nut to 2-inch pipe.
2.
Fix the antenna extension cable to the bracket using the provided nut with a torque of 6 to 7
N∙m as shown in the Figure C5-11. Use the nut which is attached to the antenna extension
cable.1
3.
Screw the antenna into the antenna connector of the antenna extension cable on the
bracket.
Tighten the antenna connector with a torque of 2 to 3 N∙m.
4.
Protect the connection with a tape as necessary. For details of the protection, see "5.4.1
Mounting ISA100.11a antenna to YFGW510".
U Bolt
Vertical piping
Bracket
FC0511-1.ai
U Bolt
Horizontal piping
FC0511-3.ai
<C5. Wiring>
Wireless LAN antenna
FC0511-2.ai
Wireless LAN antenna
FC0511-4.ai
IM 01W02E01-01EN
C5-13
Advertisement
Table of Contents
