I s s u e 1 . 0 , A p r i l 2 0 0 6
is a point-to-point interface, specifying a subnet mask is optional.
For the same behavior as described for Ethernet interfaces above, the subnet mask should
be specified. If the subnet mask is not specified, the IP address will not be associated with
any subnet, but will still be recognized as one of the IP stack's own addresses for local
traffic.
•
DHCP Client: Set to true if you would like to configure the router as a DHCP client.
After entering your RIP and LAN configuration settings, click Apply. The "LAN Connection"
page will appear stating the changes you have just made.
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
The availability of features and technical specifications herein subject to change without notice.
35
Section 364-180-N02