Table of Contents
Advertisement
I s s u e 1 . 0 , A p r i l 2 0 0 6
2. Router Card configurations get from PC the CLI commands bellow:
tftpc connect 172.16.100.88
Successfully connest to 172.16.100.88
tftpc get im.conf //flashfs/im.conf
name is "im.conf)
GET 13029 bytes from im.conf to //flashfs/im.conf (Get Router Card configuration from PC
successfully)
system restart
* For the details of the tftp console commands, please refer to Ethernet Router CLI Manual Section
364-180-C01.
Note: When you FTP to the router or use tftp command (CLI or console) in the router, you don't
need to change to any other directories. Just get or put the configuration file to the connected
directory directly.
You can exit the tftp console command mode by entering the "home" command to return to the
root command tree of the console mode. You can exit the console mode back to the CLI mode by
entering the "exit" command.
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
The availability of features and technical specifications herein subject to change without notice.
(PC IP address: 172.16.100.88)
(Router Card connect with PC successfully)
(Get Router Card configuration from PC. The file
120
Section 364-180-N02
Advertisement
Table of Contents
