Table of Contents
Advertisement
I s s u e 1 . 0 , A p r i l 2 0 0 6
ethernet add transport eth0 ethernet
ip add interface eth0 192.168.0.1 255.255.255.0
bridge add interface bridge1
bridge attach bridge1 eth0
3. Add a Frame Relay device to the Bridge, with Frame Relay configured to run on port fr using
DLCI 100. In the following commands, frame-0 is the transport name and bridgedether is the
encapsulation method:
framerelay add transport frame-0 fb 100
framerelay set transport frame-0 encapsulation bridgedether
bridge add interface bridge2
bridge attach bridge2 frame-0
ip attachbridge eth0
Configure Router B using the CLI
Configure Router B by following the same configuration instructions for Router A except you
will need to change the IP address from 192.168.0.1 to 192.168.0.3.
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
The availability of features and technical specifications herein subject to change without notice.
126
Section 364-180-N02
Advertisement
Table of Contents
