Table of Contents
Advertisement
I s s u e 1 . 0 , A p r i l 2 0 0 6
3. Enter a new user name and password. Select true for the "Dial-in user?" field and then select
your access level. The access level determines what a user can do in the configuration
(please refer to Table 6-2).
4. Click the Create button and then from the left frame, in the Configuration menu, click Save
config to save the configuration.
Configuring PPTP or L2TP Client-Initiated Tunneling with VPN Concentrator
The following configuration is only suitable for the Windows 2000 Client.
1. From the Windows Start Menu, select Settings, then Control Panel, then Network and
Dial-Up Connections, and then Make New Connection.
2. The "Network Connection Wizard" will appear. Click Next.
3. Select Connect to a private network through the Internet and click Next.
4. Select Automatically Dial this Initial Connection and then select Virtual Private Connection
from the drop-down menu. Click Next.
5. Enter the Destination IP Address (LAN IP address of the main office router) and click Next.
6. Select Add only myself and then click Next.
7. Enter a user name and password for your new connection and then click Properties.
8. The "Virtual Private Connection" window will appear. In the General tab, enter the IP
address of your destination.
9. Select the Networking Tab. Choose your desired type of VPN server from the drop-down
menu. Then select the Internet Protocol (TCP/IP) component by clicking on it, then click the
Properties button. Be sure that TCP/IP is configured to Obtain an IP address automatically
and then click the Advanced tab. Check the "Use default gateway on remote network" and
click OK.
NOTE: For L2TP on Windows 2000 computers, you must disable IPSec by
modifying the registry. Be sure to take adequate precautions, such as backing up
the registry, prior to modifications. You should also refer to the Microsoft website
for the correct procedure for modifying the registry. Please refer to Microsoft
articles Q258261 - Disabling IPSec Policy Used with L2TP and Q240262- How to
Configure a L2TP/IPSec Connection Using a Pre-shared Key.
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
The availability of features and technical specifications herein subject to change without notice.
103
Section 364-180-N02
Advertisement
Table of Contents
