Table of Contents
Advertisement
I s s u e 1 . 0 , A p r i l 2 0 0 6
transport, and ethernet is the port name.
ethernet add transport eth0 ethernet
ip add interface eth1 192.168.0.1 255.255.255.0
ip attach eth1 eth0
Add a Frame Relay device to the router, with Frame Relay configured to run on port fr using
3.
DLCI 100. In the following commands, frame-0 is the transport name and routedip is the
encapsulation method:
framerelay add transport frame-0 fr 100
framerelay set transport frame-0 encapsulation routedip
ip add interface frame-0 10.10.10.1 255.255.255.0
ip attach frame-0 frame-0
Configure Router B using the CLI
The configuration here is similar to Router A.
ip clear routes
ip clear rip
ip clear interfaces
port fr set AutoStart false
port fb set AutoStart false
dhcpclient update
ethernet add transport eth0 ethernet
ip add interface eth1 192.168.1.3 255.255.255.0
ip attach eth1 eth0
framerelay add transport frame-0 fr 100
framerelay set transport frame-0 encapsulation routedip
ip add interface frame-0 10.10.10.2 255.255.255.0
ip attach frame-0 frame-0
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
The availability of features and technical specifications herein subject to change without notice.
128
Section 364-180-N02
Advertisement
Table of Contents
