Table of Contents
Advertisement
I s s u e 1 . 0 , A p r i l 2 0 0 6
dhcpclient update
2. Add an Ethernet device to the Bridge. In the following commands, eth1 is the transport name,
ethernet is the port name and bridge1 is the Bridge interface name:
ethernet add transport eth1 ethernet
ip add interface eth1 192.168.0.1 255.255.255.0
bridge add interface bridge1
bridge attach bridge1 eth1
ip attachbridge eth1
ip list int
3. Create the PPP transport. The following commands configure PPP device 1 for dial-out on
HDLC port, ppp1 is the transport name and 1 is the interface id:
pppoh add transport ppp1 dialout 1 hdlc
4. Configure the PPP transport:
A.
No authentication will be used.
pppoh set transport ppp1 welogin none
B.
Ensure that PPP uses the correct IP subnet mask:
pppoh set transport ppp1 subnetmask 255.255.255.0
5.
Add the PPP device to the bridge.
Bridge add interface bridge2
Bridge attach bridge2 ppp1
Configure Router B using the CLI
The configuration here is similar to Router A.
ip clear routes
ip clear rip
ip clear interfaces
transports clear
port fr set AutoStart false
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
The availability of features and technical specifications herein subject to change without notice.
130
Section 364-180-N02
Advertisement
Table of Contents
