I s s u e 1 . 0 , A p r i l 2 0 0 6
Step 2 - Install TCP/IP, if necessary
Install TCP/IP now if it is not previously installed. You may need the Windows Installation
CD-ROM.
1. Still in the "Network" window, click the Add
button. The "Select Network Component
Type" window will appear. Select Protocol
by clicking on it once. Then click Add.
2. The "Select Network Protocol" window will
appear. Choose Microsoft in the
"Manufacturers" panel and then TCP/IP in the
"Network Protocols" panel. Click OK.
©2006 Charles Industries, Ltd.
All rights reserved. Printed in United States of America.
The availability of features and technical specifications herein subject to change without notice.
3. Confirm that the TCP/IP protocol has
been correctly set up with your Ethernet.
Click OK.
14
Section 364-180-N02