Connections For A Standard-Defi Nition Tv And Vcr - Cisco Explorer 8640HDC User Manual

Connections for a Standard-Defi nition TV and VCR

When using the set-top with an SDTV, you must make one of the following connections to view content. Some
SDTVs may not have all these connections. In addition, you can make connections to a VCR to record to a VCR
tape. Refer to your TV and VCR user guides and the cabling diagrams in this guide for more detailed information.
Note: The labeling on your set-top, SDTV, and VCR may vary slightly.
Required Connections to an SDTV (use one)
The YPbPr connectors can provide standard-defi nition component
video signals to an SDTV.
Note: To connect YPbPr to an SDTV, you must set the HD Setup
Wizard on the set-top to HD Mode, and select the output video
format (typically 480i) that will match the capabilities of your SDTV.
The S-Video Out connection provides an optimal video connection
to SDTVs.
The Cable Out connector provides a video and audio connection
to an SDTV.
Optional Connection to a VCR
For VCRs with Video and Left and Right audio connectors, you
can use the Out 2 connectors (Video, Left, and Right) on the
set-top.
Set-Top
Connections Connections
Pr OUT 1
Y
Pb
Pb
L
Pr
Y
R
OUT 2
L
S-VIDEO S-VIDEO
OUT IN
R
CABLE CABLE IN/
OUT
Set-Top
Connections Connections
OUT 2
A
U
L
D
I
VIDEO
R
O
IN
VIDEO
SDTV
L R
L R
ANT IN
VCR
L R
AUDIO
IN
7