Back Panel - Cisco Explorer 8640HDC User Manual

High-definition dvr set-tops with multi-stream cablecard interface
Hide thumbs Also See for Explorer 8640HDC:
Table of Contents

Advertisement

Back Panel

THIS DEVICE IS INTENDED TO BE ATTACHED
MCARD SN: PXCPRPSLV
TO A RECEIVER THAT IS NOT USED TO
RECEIVE OVER-THE-AIR BROADCAST
SIGNALS. CONNECTION OF THIS DEVICE
MCARD MAC: 00 1BD73E17D9
IN ANY OTHER FASHION MAY CAUSE
HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS AND IS IN VIOLATION
MULTI-STREAM CABLE CARD
OF THE FCC RULES, PART 15.
SCIENTIFIC-ATLANTA, INC.
1 Cable In
Connects to a coaxial cable that delivers the signal from your service provider
2 Bar Code Label
Contains set-top serial number and MAC address
3 Video Out
Connects to the composite input on your TV
4 Audio Out
Connects to RCA cables that send analog audio signals (left and right) to the stereo inputs
on a TV
5 HDTV (YPbPr)
Connects to the component input (YPbPr) on the HDTV
6 Audio Out
Connects to RCA cables that send analog audio signals (left and right) to the stereo inputs
on a TV
7 Digital Audio
Connects to an RCA cable that sends a digital audio signal to a surround-sound receiver or
Out
other digital audio device input
8 S-Video Out
Connects to an S-Video cable that sends an S-Video signal to your TV or VCR. This signal
is standard-defi nition, but higher quality than other SDTV connections
9 IR Remote Input
Available to be connected to an approved remote IR receiver (purchased separately)
10 Cable Out
Connects to a coaxial cable that sends analog audio and video signals to a TV or VCR
11 Optical Audio
Connects to an optical cable that sends a digital audio signal to a surround-sound receiver
Out
or other digital audio device input
12 HDMI
Connects an HDMI™ cable to the HDMI input of an HDTV. HDMI supports both digital audio
and video. May be used to connect to a DVI interface using an HDMI-to-DVI adapter for
video and separate audio connections. Any of the following audio connections may be
used: Audio Out (4 or 6); Digital Audio Out (7); or Optical Audio Out (11)
13 USB 2.0
Connects to external USB equipment approved by your service provider, software
controlled
14 Multi-Stream
Slot for M-Card module, which decrypts subscription digital channels. This set-top will not
CableCARD
operate correctly without an M-Card module which is installed by your service provider
15 eSATA
Connects to an external Serial ATA (eSATA) hard disk drive for expanded drive space. A
connected eSATA drive is not an archival device. Ask your service provider for a list of
approved hard drive models for use with the DVR
16 M-Card Label
Contains M-Card serial number and MAC address
17 1394
Connects to display devices that are equipped with a 1394 input
18 Ethernet
Connects to external Ethernet equipment approved by your service provider
19 AC Power Input
Connects to the power cord to deliver power to the set-top
20 AC Outlet
Connects to the AC power cord from another device, such as a TV
Note: This illustration may vary from the actual product.
4
OUTPUT
DIGITAL
AUDIO
VIDEO
Y
L
Pb
L
R
Pr
R
CABLE IN
CATV CONVERTER
MADE IN MEXICO
1
2
3
4 5
6
MULTI-STREAM CABLE CARD
OPTICAL
AUDIO
OUT
MCARD SN: PXCPRPSLV
IR
MCARD MAC: 00 1BD73E17D9
CABLE OUT
USB 2.0
eSATA
S-VIDEO
1394
OUT
8 10
12 13 15 17 18
7
9
11
14
16
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
120 VAC
60Hz 4.2A
500W
120V~
60Hz 80W
ETHERNET
LISTED 14H1
VIDEO PRODUCT
19
20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Explorer 8642hdcExplorer 8650hdcExplorer 8652hdc

Table of Contents