Connections For A Standard-Defi Nition Tv And Vcr - Cisco Explorer 3350 User Manual

Connections for a Standard-Defi nition TV and VCR
When using the 3350 with an SDTV, you must make the following connections to view content.
Check your TV's user guide for connection instructions.
Use one of the following connection combinations, but not both:
• Connect the CABLE OUT port from the set-top to the CABLE IN/ANT IN port on a TV or VCR.
• Connect the VIDEO OUT port and the L/R AUDIO OUT ports from the set-top to the VIDEO IN
and L/R AUDIO IN ports on a TV or VCR.
Note: The S-Video connection is an optional connection. However, it is the preferred video
connection if it is available on your TV. You must make a separate audio connection when using
S-Video.
Required Connections to an SDTV
The S-Video Out connection is an alternative to the video
connection and provides optimal video to standard-defi nition
TVs.
The Video Out connection provides a video connection to
standard-defi nition TVs.
The left and right audio outputs provide stereo sound when
connected to a stereo receiver or a TV with stereo sound.
The Cable Out connection provides both a video and an
audio connection to an SDTV.
Optional Connections
The Cable Out connection provides both a video and an audio
connection to the VCR.
The Digital Audio Out connection provides an excellent
audio signal to a surround-sound receiver or other digital
audio devices.
Note: Digital audio is only active on digital channels.
10
3350 SDTV
Connections Connections
S-VIDEO S-VIDEO
OUT
VIDEO
VIDEO IN
OUT
L
L
R
AUDIO
OUT
CABLE IN/
CABLE
ANT IN
OUT
SDTV
3350
Connections
Connections
CABLE IN/
CABLE
ANT IN
OUT
DIGITAL AUDIO
DIGITAL
OUT
AUDIO
IN
IN
R