Linksys 900 Series Administrator's Manual page 49

Chapter 2 Getting Started
For example, to input password test#@1234 by phone keypad, you need to press the following
sequence of digits: 8378001234.
1.
After entering a value, press the # (pound) key to indicate end of input.
–
–
–
–
Notes:
–
–
2.
After one minute of inactivity, the unit times out. The user needs to re-enter the configuration menu
from the beginning by pressing * * * *.
Document Version 3.1
To save value, press 1.
To review the value, press 2.
To re-enter the value, press 3.
To cancel the value entry and return to the main configuration menu, press
The final # key is not included in the password value.
Saved settings take effect when the telephone is hung up, and if necessary, the 900 Series phone
automatically reboots.
Using the Interactive Voice Response Interface
Linksys 900 Series IP Phone Administrator Guide
*
' (star).
2-21