Linksys 900 Series Administrator's Manual page 147

Chapter 5 900 Series phone Field Reference
Table 5-1
Dial Plan Entry
1xxx[2-9]xxxxxx
xxxxxxxxxxxx.
If IP dialing is enabled, one can dial [user-id@]a.b.c.d[:port], where '@', '.', and ':' are dialed by
entering *, user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and 255, and
port must be larger than 255. If port is not given, 5060 is used. Port and User-Id are optional. If the
user-id portion matches a pattern in the dial plan, then it is interpreted as a regular phone number
according to the dial plan. The INVITE message, however, is still sent to the outbound proxy if it is
enabled.
Field
Dial Plan
Enable IP Dialing
Document Version 3.1
Dial Plan Script Syntax
Description
Dial plan script for this line.
The dial plan syntax is expanded in the SPA3102 to allow the designation of three
parameters to be used with a specific gateway:
•
uid – the authentication user-id
•
pwd – the authentication password
•
nat – if this parameter is present, use NAT mapping
Each parameter is separated by a semi-colon (;).
Furthermore, it recognizes gw0, gw1, ..., gw4 as the locally configured gateways, where
gw0 represents the local PSTN gateway in the same SPA3102 unit.
Example 1:
*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=xyz
Example 2:
*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd=xyz
Example 3:
[39]11<:@gw0>
Enable or disable IP dialing.
The default is no.
Functionality
US 1 + 10-digit long distance number
Everything else (Int'l long distance, FWD, ...)
Linksys 900 Series IP Phone Administrator Guide
Ext 1/2/3/45/6 Tab
5-45