Introduction - Uplink 5200 Installation & User Manual

®
5200

INTRODUCTION

The Uplink 5200 Broadband communicator expands the capability of a Contact
®
ID dial-up alarm system by enabling it to transmit signals over the internet. It is a
cost-effective solution where there is broadband internet service. The 5200 can be
used for retrofits on existing alarm systems, takeovers and new installations.
The 5200 converts the dialer output of an alarm system to an IP signal that can
be transmitted securely over the internet to an Uplink server. A connection is then
made to the central station to deliver the alarm signal. The 5200 supports two-way
voice sessions as well as remote programming for most systems.
Installation is fast and easy. Using the provided cables, the 5200 communicator is
hardwired between alarm dialer and internet service.
3