2410 and 5410 User Guide
Headset Working
When a headset is to be used on your phone, it must be plugged in to the headset socket on the base of
your phone. To activate the headset and switch off the handset, press
button is illuminated when Headset Working is activated.
To answer an incoming call:
Press
next to the flashing bell icon ( ).
To clear a headset call:
Press
Drop.
To manually make a call:
Dial the number (remember to include the required access code for an outside line) and listen to
the progress of the call.
To automatically make a call:
Do any of the following:
Press
Redial and select from (up to) one of the last ten numbers that you dialed by pressing
the associated a Call Appearance key. The call is made automatically for you.
or
Access the Call Log and initiate a call to a specific entry. See Making Calls from the Call Log.
or
Access the Speed Dial List in your personal directory and initiate a call to a specific entry. See
Dialling a Speed Dial Number.
When the call is answered, speak to the called party.
2410 and 5410 User Guide
IP Office 3.2
Headset. The lamp beside the
[15-601076] Issue [4] (5 June 2006)
Page 8