Mira escape Installation & User Manual page 12

Feed cable into Case. Fit Earth sleeve
(not supplied) and strip insulation.
Do not twist cable cores.
Firmly connect the conductors. Do not
exert strain on the terminal block.
Refit the Service Tunnel and Cover.
Make sure they fit correctly.
Do not overtighten screws.
Do not use alternative screws to secure
the Cover. This can cause internal
damage to the appliance.
Do not seal around the back of
appliance.
Cover Retaining Screw
Service Tunnel

Important! Make sure
that the inlet earth wire is
routed as shown. Failure
to do so may cause
product malfunction.
L = BROWN
E = GREEN/YELLOW
N = BLUE
Cover