Setting The Squelch; Selecting A Channel - Cobra 75WXST Operating Instructions Manual

OPERATION

SETTING THE SQUELCH

14
SETTING THE SQUELCH
Think of your Squelch Control as a gate for incoming signals. If you turn
the Squelch Control fully clockwise, you effectively close the "gate"
and no signals will pass through. If you turn the Squelch control fully
counterclockwise, you open the gate and all signals come through.
To achieve the Desired Squelch
Setting (DSS):
1. Turn SoundTracker on
2. Turn the Squelch Control
(SQL) counterclockwise until
you hear nothing but static.
3. Slowly turn the Squelch
Control back clockwise, just
until the static stops. This is the
optimum receiving level, (DSS)
allowing only strong signals to
come through.
S T
OUND
S T
OUND RACKER
TM
S T
OUND RACKER
TM

SELECTING A CHANNEL

1. Change channels by pressing either the
channel s up or channel t down key .
2. To quick-advance channels, press and
hold either key.
RACKER
TM
OPERATION
SELECTING A CHANNEL
15
Channel UP
Channel DOWN