All Channel Scan; Weather Channel; Channel Saver - Cobra 75WXST Operating Instructions Manual

OPERATION
CHANNEL SCAN
20

ALL CHANNEL SCAN

1. Set Squelch Control (SQL) to
desired setting.
2. Press Scan key. When
activity is found on a channel
scanning will stop.
3. Press any key to stop
scanning sequence.
NOTE. The 75WXST will
stop scanning and
monitor a channel
when it receives an
incoming transmission.
Five seconds after the
transmission stops, the
75WXST will resume
scanning.
S T
OUND RACKER
TM
WEATHER CHANNELS/CHANNEL SAVER
WEATHER CHANNELS
1. Press the CB/WX key.
2. Press Up/Down Channel keys
to change stations.
3. Press the CB/WX key again to
resume normal CB operation.
CHANNEL SAVER FEATURE
Automatically retains the last channel used when CB is turned off and
returns you to that channel when CB is turned back on.
To function, the "red wire" must be directly connected to either:
1. Positive (+) battery terminal.
2. Connection on the fuse box that is always on.
OPERATION
21