Mounting Connector Box; Microphone Hanger - Cobra 75WXST Operating Instructions Manual

INSTALLATION
CONNECTOR BOX
8

MOUNTING CONNECTOR BOX

1. Hold Cobra 75WXST Connector Box in
exact location desired for mounting.
2. Using it as a template, mark the location
for the mounting screws (included).
NOTE: Make certain that nothing will
interfere with the installation of the
mounting screws, before drilling holes.
3. Mount Connector Box as shown.
CONNECTING WIRES
4. Connect the 5. Connect the
antenna cable plug. red wire marked
"BATT" (+) directly
to the positive side
of the battery or to a
connection on the fuse
box that is always on.
6. Connect the
black leader marked
"Ground" to the
negative side of the
car, usually the chassis.
Any other location with
good electrical contact
(paint removed) will
also work.
INSTALLATION
INSTALLING
MICROPHONE
HANGER
1. Hold microphone hanger
in location desired for
mounting. Make certain that
nothing will interfere with
the hanger's installation.
2. Mark the location for
the three mounting screws
(screws included).
3. Drill and mount
microphone hanger as
shown.

MICROPHONE HANGER

9