Audio Files; Hd Radio Source; Menu - Kenwood KDV-412 Instruction Manual

Dvd receiver
Hide thumbs Also See for KDV-412:
Table of Contents

Advertisement

D
Cannot select soundtrack language, subtitle
langualge or angles, or the disc does not play
in the
~)pecified
language.
V' Multiple languages or angles have not been
included.
-
It may be possible to select these using the
Menu. Refer to the disc's instruction leaflet
D
The
VCD
Menu (Playback Control) is not
displayed
V' Playback Control has not been included in
the VCD.
-
Refer to the disc's instruction leaflet
Audio files
D
Canno1t play an Audio file.
D
The sound skips when an Audio file is being
played.
V' The recording condition is bad.
-
Record the media again or use another
media.
V' The media is scratched or dirty.
-
Clean the disc, refer to <Disc cleaning> in
the <Handling media> section (page 11).
D
The Audio file track time is not displayed
correctly.
V' --
-
There are times when it is not displayed
correctly depending on the recording
conditions of the Audio file.
HD Radio source
D
No sound can be heard, or the volume is low.
V' The preset broadcast station is not
transmitting in the mode that was set with
<HD Radio Receive mode Setting> (page
52).
-
Please set <HD Radio Receive mode
Setting> to "AUTO".
V' In digital AM broadcasting, receive mode
switches between stereo and monaural too
often.
-
Receiving condition is bad or unstable.
Stereo is chosen when receiving condition is
good, and it switches to monaural when the
condition becomes bad.
V' HD Radio tuner is connected to KCA-S220A
or other units.
-
Connect the HD Radio tuner directly to this
unit
Menu
D
The Security Code feature is not displayed.
V' The "DEMO" feature in <Menu setup> is
"ON':
-
Turn the "DEMO" feature "OFF", referring to
the <Demonstration setup> section (page
54).
V' A security code has already been set
-
When the Security Code is initially set, "CODE
SET" changes to "CODE CLR".
D
The display's brightness level does not
change.
V' The car's light switch is OFF
-
Turn ON the car's light switch.
V' The illumination cord has not been
connected.
-
Connect the cord correctly, referring to the
<Connections> section (page 74).
English. 67

Advertisement

Table of Contents
loading

Table of Contents