Return to the Top page
CD, Disc, iPod, USB device, SD card
C
D/Audio and Visual Files/iPod Operation
Music/Video/Picture Basic Operation
Most functions can be controlled from the source control screen and playback screen.
NOTE
•
Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode
(P.103).
• To connect iPod to this unit, optional accessory KCA-iP202 or KCA-iP102 is necessary.
When iPod is connected using the KCA-iP202, you can listen to audio and watch video. When iPod is connected
using the KCA-iP102, you can only listen to audio.
When using the KCA-iP202 to connect your iPod, set "iPod AV Interface Use" or "AV-IN2 Interface" to "iPod", in
, or to "AV-IN2" when using KCA-iP102.
Input Setup (P.88)
See the following sections for each source operation.
• Music CD
(P.34)
• Disc media
(P.34)
Music CD and disc media
NOTE
• In this manual, "Music CD" will be referred to as the general CDs which include music tracks in.
"Disc media" will be referred to as CD/DVD disc which includes audio, picture or video files.
• The screen shot below is for CD. It may be different from the one for disc media.
Simple Control screen
1
2
3
1 Information display
Displays the following information.
• Track #: Each time you touch this area, display switches between current track number, text, etc.
• 3, ¡, ¢, 7, etc.: C urrent play mode display
The meanings of each icon are as follows; 3 (play), ¡ (fast forward), 1 (fast
backward), ¢ (search up), 4 (search down), 7 (stop),
(pause).
2 Movie display area/Control switching area
Touch to switch between the Simple Control and List Control screen.
34
34
• USB device
• SD Card
• iPod
5
4
(P.36)
(P.36)
(P.36)
List Control screen
3
4
AV
2
6
7
8
(resume stop), 8
R