Table of Contents
Advertisement
Menu
AMP (Buillt-in amp loutput)
Output from the built-in amp is turned ON and OFF
When there is a system where power amps are
connected to the preamp output terminals of both the
front speaker and the rear speaker, operation of the
built-in amp can be stopped by turning this function
"OFF".
The quality of audio output from the preamp outputs
can be improved by stopping operation of the built-in
amp.
BEEP
(Be~~ping)
This function produces a beeping sound when
pressing a button to confirm that the button has been
pressed.
If you find this beeping sound annoying, you can get
rid of it by turning it "OFF".
Please note that this beeping sound does not come
out of preamp outputs.
CD READ (Reading a CD)
Specifies the method for reading a CD.
When a specially formatted CD does not play properly,
specifying "2" will make the CD play. Please note that
even after selecting "2", it will not be possible to play
some music CDs. Also, if you set it to "2", you cannot
play audio or picture files. Under normal circumstances
set at
"1 ".
'
1 : It automatically distinguishes between a disc with
audio files/picture files and a music CD during
playing the disc.
2 :
It
overrides to play the disc as a CD.
CODE SET/CODE CL,R (Setting security code/
Clearing loecurity c()de)
Sets and cancels the security code
Once a security code has been set, when the
unit is usee for the first time after the unit has
been unplugged, the unit's power cord has been
disconnected or the Reset button has been pushed,
the power will not turn on unless you enter the set
security code. In other words, this function helps
prevent theft as the security code must be entered
after the unit has been removed from the vehicle.
CRSC (Clean Reception System Circuit)
Temporarily have reception alternate from stereo to
mono to reduce multi-path noise when listening to an
FM station.
Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF
DIM (Dimmer)
Display brightness automatically switches on in
conjunction with the vehicle light SWitch.
DISP
When set at the "OFF" position, the display disappears
if the unit is not operated for a period of five seconds.
This prevents the display from being reflected in the
vehicle's windows.
However, if any of the modes have been set the display
will not disappear even after five seconds.
When the display is off, pressing any buttons will return
the display.
Please note that when the display disappears, the
only operations that can be performed are turning
the power ON and OFF, adjusting volume, selecting a
source and ejecting a disc.
DSI (Disabled system indicator)
Turns the security indicator ON and OFF.
When this function is ON and the panel has been
removed, the
LED
for the
[~]
(Eject) button flashes
so that it functions as a theft prevention warning
light.
KEY (Button illumination)
You can choose green or red for illuminating the
buttons.
SCL (Scrolling)
In cases where there are too many characters to display
all the information when selecting disc or track titles,
disc or track text, group titles, folder names, file names,
track names and artist names or album names on the
display, use this function to scroll down so that all the
information is displayed.
When this function is set at "AUTO" the display scrolls
repeatedly. When it is Set at "MANU" the display scrolls
once only when the display changes
English
69
•
, ...
Q.
Gi
::E:
Advertisement
Table of Contents
