Table of Contents
Advertisement
.;,~':'-:'~t·j>f
.,.;;-;1:>'i~1
..
;;'#~~-:!"4
~;!~;~~1#
..
';!.i!~iJ
·:~!.f''''.,,~
,·Mites
~".t·r"'·",~:>"
,,;;M!~1if'
t:11;~~
t~1
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check
with your Kenwood dealer to make sure that they
work with your model and in your area.
• If the unit fails to operate properly, press the Reset
button. The unit returns to factory settings when
the Reset button is pressed.
• Press the Reset button if the disc auto changer fails
to operate correctly. Normal operation should be
restored.
• We recommend the use of <Setting security code>
(page 50) to prevent theft.
• The characters which can be displayed by this unit
are A-Z 0-9
@ '" '
%
& *
+ -
= , .
1\<
> [] () : ;
1\ - { }
1- .
• The RDS feature won't work where the service is not
supported by any broadcasting station.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display of the actual equipment, and some of the
illustrations on the display may be inapplicable.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
• Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liqUid such as thinner or alcohol may
scratch the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty,
wipe them with a clean soft dry cloth.
8
tt
KDV-412
Before using this unit for the first time
This unit is initially set on the Demonstration mode
When using this unit for the first time, cancel the
<Demonstration setup> (page 54).
About SIRIUS Satellite radio tuner
Refer to the instruction manual of SIRIUS Satellite
radio tuner KTC-SR90 1ISR902/SR903 (optional
accessory), when connected, for the operation
method.
• Refer to the sections of A models for operations.
FMI
t+olI
SCRL AUTO
~
~ [~ I«~
, ,:' , ,,;' , , , ; : , ·;'1.'
,,"I
1ii.,o1J
1 - 6
AM SRC D1SPlCS.
About DAB Tuner control
Refer to
~
group on the Instruction manual of DAB
Tuner KTC-9090DAB (optional accessory) for the
control method of DAB Tuner function.
However, the following control methods of the
function for this unit may be different from the
descriptions given in the Instruction manual;
therefore, refer to the follOWing supplemental
instruction.
<Auto Ensemble Memory Entry>
1. Select the preset band for Auto Ensemble
Memory Entry.
2. Press the [AME] button for at least 2 seconds.
Open Auto Ensemble Memory Entry.
After storing in the memory is completed, the
number of the pre-set buttons and the ensemble
label are displayed.
<Searching by programme type and language>
At the operation to press [DISP] button, use [AUTO]
button instead.
Advertisement
Table of Contents
