Setting Time And Day; 12 Hr. / 24 Hr. Time Format - Hunter 44760 Owner's Manual

41652_model44760_web.pmd
18
PROGRAMMING

Setting Time and Day

Step 1
day-time
or
Step 2
day-time
or
19
Step 3
day-time
or
Step 4
day-time
or
ret-clear
NOTE: You may press ret-clear at any time during Day and Time setting to return to the normal display.

12 Hr. / 24 Hr. Time Format

Your thermostat is set from the factory in normal 12
(AM / PM) time format. To change to 24 hour (military)
time, press
option
or Day is flashing to toggle between the 12 hour and 24 hour
The LCD will show this information when batteries are first installed, or after
the Reset button is pressed. The temperature will update after a few seconds.
During time and day setting mode, the temperature and program
displays will go blank.
Example: Set the Thermostat to the current time of 2:16 PM on Saturday.
Refer to the Steps below.
Press to enter time and day setting mode. The current hour and the
AM / PM indicator will be flashing.
Press to change the Hour up or down to the current hour.
Note the AM / PM indicator, as the display will change at 12 AM
and 12 PM.
Press again to change from hour setting to minute setting. The current
minute will be flashing.
Press to change the Minute up or down to the current minute.
Press again to change from minute setting to day setting. The current
day will be flashing.
Press to change the Day up or down to the current day.
Press again to change back to the normal display.
at any time while the Hour, Minute,
Monday
AM
Monday
AM
Monday
PM
Saturday
PM
Saturday
AM
formats. The AM / PM indicator will not be displayed in 24
hour mode. Both the current time and all programs will auto-
matically change to the selected format. The time format may
also be changed in the Option Menu.
18
4
Temp
System Fan
2
Temp
System Fan