Setting Day And Time - Hunter 44273 Owner's Manual

Once you install the batteries, the thermostat will prompt you to set the
current day and time.
1. You will notice that "Mon" will be flashing at the top left of your
screen. Use the
week and press the
2. Use the
to advance.
Next
3. Next you will select your current hour by using the
The button advances you to the next step.
Next
4. Set your minutes using the
you need to make a correction to a previous step.
5. When finished, the thermostat will show "Updated!" to confirm your
settings are saved.
6. Your thermostat will next prompt you to set your programming, see
page 14 step 2 if you wish to alter your programs at this time.
10

Setting Day and Time

or buttons to move to your current day of the
button to advance to the next step.
Next
or button to change between am(A) and pm(P). Choose
44129-01 • 07/23/2012
or and press
or buttons.
to finish or
Done/
Home
if
Back