4 . Features ........................... 9 Your new Hunter® thermostat has been built with the quality and dependability you have come to trust in our products. Installed properly, your new thermostat will provide may years of comfortable and reliable service .
Temp Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp Time Temp 44008-01 • 02/10/10 • Hunter Fan Company...
Note: Only 3 sensors can be setup at a time. The outdoor sensor nor sensor 2 can be used to control the temperature inside the home. They will only report temperature to the thermostat. 44008-01 • 02/10/10 • Hunter Fan Company...
Proceed to set up system the alternate mode in the same manner. Once finished, if you wish to activate auto season changeover, use the button system to change to “auto” mode. 44008-01 • 02/10/10 • Hunter Fan Company...
2. The hour and am/pm indicator will be flashing program for program 2 and your system mode will be displayed at the bottom of the screen. Follow the same process throughout all 4 programs. 44008-01 • 02/10/10 • Hunter Fan Company...
Vacation hold will return to the main screen after 5 seconds of the last key press. Note: Auto season changeover will not operate in vacation hold. You will need to ensure your system is in the appropriate system mode for your season, heat or cool. 44008-01 • 02/10/10 • Hunter Fan Company...
68°F. Home Today This Hunter patented feature allows you to temporarily override your program settings on days when you are normally away from home with one key press. Press “ home today” to enter the home today override. The highest program temperature for today will be selected from your programs in Heat mode and become the set temperature.
15°F to 99°F (-9°C and 37°C). “HI” will be displayed if the temperature is higher than 99°F (37°C), and “LO” will be displayed if the temperature is lower than 15°F (-9°C). 10 10 44008-01 • 02/10/10 • Hunter Fan Company...
4 . Features (Cont.) Auto Recovery Hunter’s Auto Recovery feature meets the ENERGY STAR® guidelines for energy efficiency by allowing the heating or cooling system to recover gradually from an energy-saving set point temperature to a comfort set point temperature.
To change the span: Press the button 5 times for span. Use the to change the span number. Press the or wait 15 seconds option ret/clear to return to the main display. 12 12 44008-01 • 02/10/10 • Hunter Fan Company...
Technical support If you have any additional questions or problems with your Hunter thermostat, please call1-888-830-1326 from 7:00 am to 7:00 pm Monday - Friday and 8:00 am to 5:00 pm on Saturday, Central Time. You may also contact us over the Internet at www.
The Hunter Fan Company warrants your Hunter Thermostat to be free from defects in material or workmanship for a period of one year from the date of sale to the original user or consumer purchaser. If your Hunter Thermostat malfunctions or fails within the warranty period because of a defect in material or workmanship, we will replace it.
Need help?
Do you have a question about the 44660 and is the answer not in the manual?
Questions and answers
Curling dots between cool and auto settings