Setting Day And Time - Hunter 44277W Installation And Operation Manual

The default for this thermostat setting is in a 12
hour format. You can change the format to 24 hour
format by pressing
The am/pm indicator will be off when the thermostat is in 24
hour mode.

Setting day and time:

1. Press
Day/Time
flash)
2. Press or
Up
3. Press
Day/Time
4. Press
Day/Time
week.
5. Press
Day/Time
You may also press hold/return at any time to return to the
normal display.
seTTings, ConT.
Day/Time
. (AM/PM and current hour will
to adjust the setting.
Down
again to adjust the minute setting.
again to adjust the day of the
to return to the normal display.
25
and then Program.