Setup; Setting Day And Time - Hunter 44372 Owner's Manual

Setup

Setting Day and Time

Once you install the batteries, the thermostat will prompt you to set the current day
and time.
1. You will notice that "Mon" will be flashing at the top left of your screen. Use the
or buttons to move to your current day of the week and press the
advance to the next step.
2. Use the or button to change between am and pm. Choose
3. Next you will select your current hour by using the
advances you to the next step.
4. Set your minutes using the
make a correction to a previous step.
5. When finished, the thermostat will show "Updated!" to confirm your settings are
saved.
6. Your thermostat will next prompt you to set your programming, see page 14 step 2 if
you wish to alter your programs at this time.
10
All manuals and user guides at all-guides.com
4
or and press
Done/
Home
44040-01 • 05/11/2010
button to
Next
to advance.
Next
or buttons. The button
Next
to finish or if you need to
Back