Bayer HealthCare Contour USB User Manual page 27

Error Detection Displays:
An error screen will always
have an "E" with a number
in the lower left hand
corner of the display.
If there is an error (hardware, software, testing
errors) detected by your meter, your meter will
beep twice. You will see specifi c instructions to
guide you. The fi rst line of the error screen will tell
you what the error is. The next lines describe what
you should do. When an error screen has an OK
shown, press the button next to it to continue.
Battery Status Displays:
The battery status will be
displayed with a battery
symbol on the Apply
Blood screen and the
Main Menu screen. It
shows how much battery life is left. This screen
displays full battery.
As the battery is used,
the battery symbol on the
screen gradually shows
less fi ll color. The color
of the battery fi ll turns
yellow when the battery is low and then red when
your battery is almost out of charge.
50
Need Help? Call toll free: 1-800-348-8100
A series of low battery
alerts will tell you that
the battery is low and to
charge soon.
If you do not charge
the battery, a display
will alert you: "Shutting
down, Battery is dead."
Charge immediately.
Plug the meter into your
wall charger or computer.
Be sure your computer
is turned on and not in
sleep, hibernate or power
save mode. Please be
aware that USB ports in
some computers and self-powered USB hubs can
become much warmer than the room. A USB cable
has been provided for your convenience. If you
wish to test immediately after disconnecting from
your computer, please use the USB cable.
The test strip port light will fl ash during charging
and stop fl ashing when charging is complete.
Please remove the meter and store in the wallet
until you are ready to test.
www.bayerdiabetes.com/us
51