Running A Program (8 Segment Programmable Models); Holding A Program; Cancelling A Program - Barnstead F62730 Operation Manual

8 S P
EGMENT ROGRAMMABLE
30
M /OTP
ODEL W
End
To end or repeat a program:
1.
2.
3.
4.
5.
Running a Program (8 Segment
Programmable Models)
To run a program, press the RUN/HOLD button. (The
RUN light will illuminate.)

Holding a Program

To put a running program on hold, press the RUN/HOLD
button. (The HOLD light will illuminate.)

Cancelling a Program

To cancel a program, hold the RUN/HOLD button down
until the RUN and HOLD lights go off.
Press the PAGE button until you reach the pro-
gram list (ProG LiSt).
Press the SCROLL button until display reads,
"tYPE."
Press the UP or DOWN button until display
reads, "End."
Press the SCROLL button until display reads,
"End.t."
Press the UP or DOWN button to toggle
between "dwEll" (an indefinite dwell), "S OP"
(End Segment Output Power) and "rSET"
(reset).